TJCTalon
10+ Year Contributor
- 925
- 73
- Aug 20, 2009
-
Nebraska
Okay so this is a bit of a situation. Im getting my 1997 up and running after its been sitting for 10-11 years. Today I finally got it buttoned up enough to try and start. I completely redid the fuel system, including new feed 8an and 6an return lines. New Wally 450 pump with rewire, new fuelab filter, FIC fuel rail. I sent my 1350's to FIC and had them cleaned. Fuel tank has been completely cleaned out and it has a fresh 5 gallons of E85 in it. Its been so long, but I know there wasnt anything mechanically wrong with the car. I was battling trying to get it to pass emissions before I parked it.
All of my ECU settings were gone when I finally got hooked up to ECMlink. I guess 10 years of no power will do that. Prior to this car sitting, If I remember correctly, I was in the middle of getting it remote tuned on Speed density. Unfortunately all of my settings were loss and im starting new. It has been so long for me using link, im very very rusty. Ive spent most of this afternoon doing research and trying to get things right. I got it to start and run earlier. Now it just cranks and half ass starts here and there.
Just need some insight on what im doing wrong so I can get this thing to idle. Just need to get it to a starting point. Ill include the few logs that I have. It only ran very briefly, and would die as soon as you hit the throttle. I believe the log it is running, I didnt have my wideband and speed density stuff as a captured value. The no start log I finally figured out how to display those values. I know im missing and doing something wrong here.
All of my ECU settings were gone when I finally got hooked up to ECMlink. I guess 10 years of no power will do that. Prior to this car sitting, If I remember correctly, I was in the middle of getting it remote tuned on Speed density. Unfortunately all of my settings were loss and im starting new. It has been so long for me using link, im very very rusty. Ive spent most of this afternoon doing research and trying to get things right. I got it to start and run earlier. Now it just cranks and half ass starts here and there.
Just need some insight on what im doing wrong so I can get this thing to idle. Just need to get it to a starting point. Ill include the few logs that I have. It only ran very briefly, and would die as soon as you hit the throttle. I believe the log it is running, I didnt have my wideband and speed density stuff as a captured value. The no start log I finally figured out how to display those values. I know im missing and doing something wrong here.
Attachments
Last edited: