FWIW, my old HKS 272s didn't kill bottom end torque at all with my 16G/Cyclone setup. I was still able to stall it up on the stock tight AF 1G converter. Don't have experience with any other 272 on a 16G setup though.
Pulled the wheels and the axles. Drained the trans too. Now all that's left is pulling the t-case and dropping the trans for HOPEFULLY the last time.Although IDK if it's normal or not, but I swear my MT90 has a couple congealed spots...
booo hissssss
so many in this city, lots of RHD versions popping up now, all base models and wagons. the lengths people go for that "RHD", but swaps are possible down the road, I get it.
still, need to get me car back out there to break up some...
Removed center console to replace with the proper grey one.Can see just what kind of colour differenceNeeds a good cleaning and some crack repair. Bonus? JBweld is the exact same shade of grey.
Fills cracks nicely.
Got the axles out. The key this time was having my wife hold the axle straight/parallel and turn it slowly while I did the “wrist flick” thing with a prybar and it came out with such little effort I actually asked aloud “did that just actually...
Screw that, if I ever make it down to see your car I'm going to crawl under it and stare intensely at that cross member. Perhaps even critique it.That being said...
Nice.
Well, awhile back(like, months) I bought the missing north/south bar aka crossmember aka wtfeverelseitscalled that runs underneath the transmission(passenger side north/south bar). I did this because while removing the transmission and...
I purchased an OEM passenger side crossmember/north-south bar/whatever the f*** its called(it attaches to the core support, runs under the transmission, and bolts to the body) awhile back and it's a rusty, greasy UNIT baby.Well, finally got a...
https://www.diyautotune.com/product/map-gm-3-bar-map-sensor/Maybe try that one? It talks about the cheap chinese made Delphi units coming apart on people, and that theirs apparently don't have that problem?What worries me is the Omnipower...
I’m wondering if this is what they are supposed to look like. The sensor is in the square box filled with epoxy, the rest of this sensor is empty space with 3 wires from the actual sensor to a plug.I dunno - I call shiningans - I think this is...
I feel like I’ve officially joined the old man club. I actually just bought a pair of safety glasses because I’m sick to death of getting rust and dirt and god knows what else in my eye everytime I’m under this damn thing. Lol.But yeah. Feels...