The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support ExtremePSI

95 TSI AWD.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rebuilt the throttle body.
 

Attachments

  • 20211107_103955.jpg
    20211107_103955.jpg
    426.8 KB · Views: 30
  • 20211107_104615.jpg
    20211107_104615.jpg
    380.8 KB · Views: 33
Replaced drip rails
 

Attachments

  • 20210912_151650.jpg
    20210912_151650.jpg
    400.7 KB · Views: 31
  • 20210912_153635.jpg
    20210912_153635.jpg
    512.1 KB · Views: 36
  • 20210912_151248.jpg
    20210912_151248.jpg
    351.9 KB · Views: 31
  • 20210912_145855.jpg
    20210912_145855.jpg
    392.6 KB · Views: 33
Clean! Love the color but I’m biased

Was the TB hard to do?
Thank you, it's a 20 foot paint job, it definitely has its flaws that need to be fixed LOL.

Not at all, it took maybe an hour taking my time making sure everything was clean and free of gunk. The most intimidating part is the springs but I watched Jafro's youtube video and it wasnt bad at all.
 
Swapped in a black dash and center console from a 99. I had swapped the vents on the panels over to see how it looked so it wouldnt be all grey. It's alright but the flow from dash to door abruptly going from black to grey bothers me. Ill swap over the fabric to the black panels when I get them. Working on getting black door panels and rear plastics now.

20220320_131325.jpg


20220320_131333.jpg


20221003_204931.jpg
 
Been a while since I updated this. Got timing belt, pulleys, and water pump done. Valve stem seals replaced, swapped in some evo 8 springs and retainers while I was there. Then started buttoning everything up. New hoses and Vacuum lines and gaskets everywhere. I bought some oem gaskets and then some gasket material and traced them out and used them instead since the oem gaskets are getting discontinued left and right. Now I got to get a BLT done and start dialing in the tps and throttle cable and do the wideband calibration.

20240116_170128.jpg


20240116_134706.jpg


d714f01e-2b30-4a44-8890-2fff72f15cb5photo.jpeg


20240402_201601.jpg
 
1st idle log after resolving boost leaks. I forgot to plug in MAF when I started to capture and realized it around 600 second mark.
 

Attachments

  • log.2024.04.28-01.elg
    777.2 KB · Views: 7
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top