The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

1G 6 bolt front case wear

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mjm0157

15+ Year Contributor
38
23
Dec 16, 2008
easthampton, Connecticut
Hey, assembling 6 bolt motor, I have a
used oem front case und strait cut gears. Gears look to be in good shape, just a little concerned about wear marks in front case from gears. I can catch my fingernail on it. Any thoughts ?

You must be logged in to view this image or video.
 
It is extremely hard to tell from a picture. The bottom looks like it has a pretty deep groove on the left but that could just be the lighting.

Does your car have a balance shaft delete? If so take a picture of the stub shaft. There's a bunch of junk stub shafts that have been sold out there which will ruin your oil pump because they don't have the correct oil groove. Might be what happened here.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top