1995-1999 2G Mitsubishi Eclipse Custom Head Lights (2GB).
RGB CONTROL WITH IPHONE OR ANDROID
SEQUENTIAL TURN SIGNAL
H3 PROJECTOR (***BULB NOT INCLUDED***)
Broken tab
Cracks and shows wear, may show signs of blemishes on lens. *USED* lens
Used condition
Must be installed professionally, or upon...
I just had mine turn on today as well lolAlot of people have been goodluck with just replacing the SRS module, located in the center console.
There are procedures for testing ill screen cap here for you to troubleshoot.
Check out my video on how i converted my drums to rear disc.I used all oem parts from a GS, all i had to do is get those backing plates and everything included it should all fit. Even the e brake cables which you have to get from inside the car.
1995-1999 Mitsubishi Eclipse 2g center tail light modification.It’s off a 97 eclipse, so it has signs of wear and cracks because of opening the lens.IF you want a custom pair, message me directly or on Instagram @nickolisioncoThese are a service too, $150 plus additional shipping fees...
this happens when typically the thermostat is faulty or for my solution everything was replaced, just the coolant i used stopped having the cooling capabilities, I used a better coolant brand and never had a problem after
make sure that the camshaft holes are pointing straight up, this will make sure that the timing is set correct on the top end, of course if the camgears are set to position it should all line up
Finally, Rear disc conversion!MY car is a RS, comes with the brake drums in the back, this is a upgrade i wanted to do and got next to nothing achieving it!
I grabbed everything from the brake caliper and bracket, backing plates, and handbrake assembly. I didn't have to cut or anything! The...
Installed the complete set of 2GB Side Skirts!All oem parts from many different dsm, at first i got the 2GA ones and didnt noticed they were different. For mounting techniques, I tried magnets and they didnt hold to the panel like I wished. Eventually, just using the original clips, in tandem...
Finally dropped the car on the Tein coilovers! I measured about a 3.75 front and 3.50 drop in the rear! Going for a bigger size wheel would make this look great