Launch control device. Installs between clutch master and slave. Adjustable on release. Can wire into Ecu (standalone) or Ecu you have that uses inputs and outputs with a table. Control the solenoid release. Flow rate is also adjustable. With instructions. Can also run it manually with...
Looking to sale an extra 7 bolt JMF Race intake I have, buyer is responsible for shipping and fees. Also I might be interested on trading this for the same but for a 1g head.
Magnus 1G head dual rail intake manifold comes with the secondary fuel rail
$1250usd shippedMagnus 2G head intake manifold with regular dsm fuel rail
$1020usd shippedMagnus DSM/EVO cam gears
$350usd shippedMagnus 90mm to 82mm TB Adaptor
Magnus Bosch adapter to 3.5 HD flange
Bosch 82mm...
These are turbo water pipes that have been modified into non turbo pipes.
They have been sandblasted and are ready for paint or power coating!2 1G head $115usd each
1 2G head $125usd
1 1G head with out heater pipe $135usdPrice is shipped lower 48/canada
DSM Sheepey Race top mount T4 divided exhaust manifold with downpipe and dump tubes
**GONE**2 black MVR 44mm Tial wastegates
$620usdBorg Warner S472 SX-E 72/82 1.00a/r with T4 Divided turbine housing
$1,250usdAFCO tucked radiator with 1G water pipe and water neck with -16 lines
Was on a...
Kiggly 2G auto trans on 6bolt block adaptor with Kiggly 6 bolt flex plate
$220usd shipped
(A bolt hole has been cut out of the adapter plate but it’s not used when installed)New DSM ARC-2 CDI & Plug/Play full kit
1991-1999
New in box
$440usd shipped shippedNew Tial 50mm BOV
Aluminum...
Selling some parts pm if you see something you need! Prices don’t include shippingDsm bellhousings $150
Dsm bearing plate $60
Dsm 5th gear cover $40
Dsm heads $200-300 depending on completeness
Valve covers $120
Arp 2000headstuds $40
2g diff (don’t know if auto or manual) $100
Eclipse...
-Bridgeport shaved
-Aluminum Pro-Werks o-ring oil cap welded in
-Single breather port (-10AN ORB) welded in
-Drilled/tapped breather port on the side with 1/8" NPT plug
-Aluminum baffles to be welded in (last thing to happen before powder-coating)$250 + shipping
For anyone interested this is the clutch - https://www.extremepsi.com/store/ACT-Sintered-Iron-Race-Twin-Disc-Kit-Mitsubishi-Eclipse-6-Bolt-AWD.htmlThey are ~$1800 new. This is over half off.Looking for $800 plus shipping.Under 500 street miles and less than 50 passes on itDisc...
Up for sale is a divided (twin scroll) t3 exhaust manifold made by Josh Callahan.Flanged for twin tial MVS 38mm v-band wastegatesLooking for $750 plus shippingEngine bay pictures are to show fitment. I had a GTX3576R turbo and it cleared the block fineTurbo and wastegates are NOT...
JMF Race Intake Manifold for 1g DSM 6 bolt head flanged for DSM throttle body - $300 + shippingPowdercoated gloss black.. some wear but looks OKComes with all fittings shownCan include 1g throttle body pictured for an additional $50