Stapl3 said:

I'd guess 15-20 years ago shops were selling them for good money. Then someone copied one in China, whored it out on ebay for a year or two at prices less than raw materials could be bought for here in the US. So the shops stopped selling them as they couldn't compete, and then after time the guys on eBay hocking them probably lost interest due to margins sucking or they sold only 25 a year or they just went to a different platform or straight up went out of business or they were just too incompetent to keep them in stock. Lots of forks in that road but either way the whole thing dies. It's the same story I've seen with many many parts over the years. It's a dirty business with no f**ks given by the guys on eBay just ruining stuff the second they get a hint of something being popular. And you see it now with even big players like Summit. They have their Summit brand which are just blatant rip-offs of legit stuff. It's a dirty f**king business and the guys getting the lions share are hacks all the way up companies of that scale.

Click to expand...

chrysler kid said:

I also need a drivers side door cap. Gotta be some one who can 3d print them

Used, they are too fragile to ship

Click to expand...

mooserage said:

Adding to the tread:
A rear diff cover with added capacity to help keep temps lower for road racing/autox folks. Wouldn't have to be as big as this Greddy example, but you get the idea.

You must be logged in to view this image or video.

Click to expand...

m_0ney_pit said:

+1 2ga eclipse door caps. Didnt Carbonetics make these at one point?

Click to expand...

chrysler kid said:

I never saw them if he did, there are vendors selling 3d printed fog light bezels and bumper duct blockers, you would think they would atleast make the corner piece at the bottom of the fender

Click to expand...

fourgsixty3 said:

Allegedly carbonetics is making 2g drip rails out of carbon fiber.

Click to expand...

SigSauer said:

How about a replacement 1ga front mitsubishi center lense? All mine are yellowed and no idea how to restore them.

Click to expand...

Justin DuBois said:

I know they are plastic, but try some 420 cleaner shaken around on the inside, rinse with warm water. I’ve used baking soda tooth paste with a tooth brush, water wash, and then some serious abrasives 400, 600, 800, 1200 grit wet sand series, and a final treatment with plastic polish. - on the main lenses, back to clear and clean. Maybe this is too much for the centers?

Click to expand...