This is the Build Thread for 1gb dsm. Reply below.

went for a test drive today, still trying to get her dialed, if yall have any suggestions I'm more than open to hear it, currently has incomplete pcv system which i believe is causing built up crankcase pressure, i had my oil cap pop off breaking the metal insert on the cap that holds it down on the vc, luckily had a spare oil cap, going to replace the pcv and add vaccum line and go from there

broke the slave cylnder mounting ear amd cracked the bellhousing in the proccess so its goin on jack stands for a bit so it can get some love, i took the bumber off and found 2 out of 3 fmic mounts completely broke so ill be replacing that with a mishimoto at some point for now i just slapped some jb weld on it and its holding fine, still have yet to find the issue on the starter but thats for another day im gonna have the bellhousing welded because from what ive read on the forums you have to dissasemble the trans to take the BH off and i think im good on that for now until i get a dsm bible

I would find the root cause of why you broke ears. Are you running an extended slave rod?

MAke sure you put all the bolts in the trans ask me how i know i didnt put the back on in near the firewall.

92AWDHX40 said:

MAke sure you put all the bolts in the trans ask me how i know i didnt put the back on in near the firewall.

Click to expand...

Definetly im keeping track of evrrything amd takimg picutre of the thing i take apart incase i forget something since its going to be sitting until i find someone that can weld cast aluminum near me and i can afford it

So i was trying to get my car together for my birthday(today) and its all come down to a damn seal on the passenger front cv axle where it goes into the trans.. long story short i got the trans welded up just to find another broken ear on the trans side this time, but its hasnt leaked since ive owned it so it getting thrown back into the car tonight and tmr ill have the seal to slap in, i cant find anywhere that gives you the right part number for it, only one ive been told that actually fits is 710396 precision or masterpro from oriellys or AZ but they measure different thicknesses can anyone confirm which one i need to run? Also does anyone have the dimentions for the hidden bolt on the back side of the BH? mine was missing so id like to put a bolt there